General Description
The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 – 52 V phantom powering (P12 – P48). The connected microphone is supplied via the adaptor.
The phantom power adaptor is available in two different versions:
MZA 900 P with lockable 3.5 mm jack socket (as evolution wireless)
MZA 900 P-4 with lockable 3-pin special socket
Please specify at checkout page when ordering
.
The adaptor is also a quick and flexible solution if a microphone is to be used for both wired and wireless applications. One and the same microphone can be used together with the MZA 900 P(-4) for wired applications (e.g. in the studio) or with a transmitter of the evolution series for wireless applications.
The MZA 900 P can also be used as a cable tester for XLR microphone cables.
Features
- Robust metall chassis
- Switchable gain (0/-12dB)
- Switchable roll-off filter (125 Hz (–3 dB), 12 dB/oct)
- Two-colour control LED (phantom power, audio peak)
- Input 3,5mm stereo jack socket, lockable
- Output XLR-3M
Delivery Includes
- MZA 900 P with belt clip
- Instructions for use
- Warranty certificatee
Technical Data
| Frequency response | 20 – 20000 Hz (–1 dB) |
| Gain | 0/-12 dB |
| Output voltage | 1,8V (P48), 0,6V (P12) @ 0dB gain |
| Output impedance | 100 Ohm |
| Min. terminating impedance | 5kOhms (P12 - P48) @ 0dB gain; 2kOhms (P12 - P48) @ -12dB gain |
| Phantom powering | P12 - P48, 10 - 52V, 2,6 - 2,8mA |
| Dimensions | Ø 19/22 mm, L 100 mm |
| Weight | 60 g |
| Operating temperature | -20.....+60 °C |
| Description | General DescriptionThe MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 – 52 V phantom powering (P12 – P48). The connected microphone is supplied via the adaptor. Please specify at checkout page when ordering Features
Delivery Includes
Technical Data
|
